Arista switch command
「Arista switch command」熱門搜尋資訊
「Arista switch command」文章包含有：「EOS4.30.2F」、「EOS4.30.2F」、「EOS4.30.2F」、「EOS4.30.2F」、「EOS4.30.2F」、「EOS4.30.2F」、「UserManual」
查看更多
EOS 4.30.2F
https://www.arista.com
The command-line interface (CLI) is one tool for controlling the switch and displaying information about its status and configuration. This chapter describes ...
EOS 4.30.2F
https://www.arista.com
This command overrides the automatic fan speed control and configures the fans to operate at 50% of maximum speed. switch(config)# environment fan-speed ...
EOS 4.30.2F
https://www.arista.com
... switch>; This command displays status information for all subinterfaces configured on the switch. switch# show interfaces status sub-interfaces Port Name ...
EOS 4.30.2F
https://www.arista.com
This command replaces the current configuration state with the startup configuration. switch(config)# configure replace start-config ! Preserving static routes.
EOS 4.30.2F
https://www.arista.com
This command configures the switch for the United States Central Time Zone. switch(config)# clock timezone US/Central switch(config)# show clock Fri Jan 11 ...
EOS 4.30.2F
https://www.arista.com
The reload (scheduled) command configures the switch to reset at a specified time or after a specified interval. Refer to reload for the functional details of ...
User Manual
https://www.arista.com
... Commands. 2.1. Initial Switch Access. Arista Network switches provide two initial configuration methods: •. Zero Touch Provisioning configures ...